WHY AUSTRALIAN MESH

A Brief History

 

 

In the mid 1980’s there was a push by the Department of Labour and the Building Industry unions to provide a safe working practice for members of these unions due to fatalities and serious injuries.  The Directors of Australian Mesh were major roofing contractors and pooled their knowledge of the industry and decided a mesh light enough to handle and strong enough to support the weight of a person falling into the mesh would be our way of demonstrating a safe working environment for our employees.

 

Unfortunately none of the current mesh manufacturers had machinery to manufacture to our requirements.   Australian Mesh eventually scoured the world for a machine to supply the equipment required.  This machine was eventually set into operation early in 1988.

   So Why AusMesh

 

  • Australian owned and operated company
  • Quality assured company to ISO 9001
  • Original Manufacturer of Roof Safety Mesh
  • Ausmesh is tested to conform with AS/NZS 4389:2015
  • Raw material (2mm gal) conforms to all specifications in AS/NZS 4389:2015
  • Ausmesh 300 galvanized 2mm is available in 3 widths
  • 1800 wide, 2250 wide and 2400 wide
  • Supplied in standard 50m rolls
  • Or cut to size to suit different roof runs (min roll size 20 meters up to maximum 250 meters)
  • Cut to size – prevents joining of  rolls on one run – which saves valuable labor time – prevents wastage – which saves money (Some larger construction companies will not allow the joining of mesh on their projects and request that cut to size is used)
  • Short lead times to supply cut to size – Dependant on state and size of order lead time could be as short as 1 working day but can be  up to 7 - 10 working days if order generated from New South Wales, South Australia or Western Australia
  • Ausmesh 300 PVC (plastic vinyl coated) only in 1800 wide x 2mm
  • Used in high corrosive areas or where a decorative finish is required
  • Available in 1800 wide only - colors white and black
  • Supplied in 50m rolls
  • Or cut to size to suite different roof runs (min roll size 20 meter up to maximum 120 metres)
  • Limited stocks are kept in both Melbourne, Queensland and Western Australia
  • If not in stock lead time from 3 – 6 working weeks

Ready For Exporting

   Supply of AusMesh 300

 

  • Queensland – manufactured in Yatala – readily available for both standard rolls and cut to size in all 3 widths 1800, 2250 and 2400 wide
  • Victoria – manufactured in Dandenong – readily available for both standard rolls and cut to size in all 3 widths 1800, 2250 and 2400 wide
  • Site deliveries in both Victoria and Queensland for a small charge – use of our own trucks and utes
  • New South Wales – storage facility in Somersby – stock of 50m rolls in pallet lots – 1800, 2250 and 2400 wide
  • Site deliveries available by our storage/transport company charges apply
  • South Australia – transported from our Dandenong factory - short lead times for 1800, 2250 and 2400 wide ( 2  -5 working days dependent on size of order)
  • Site deliveries available by our transport company charges apply
  • Western Australia – storage facility – stock of 50m rolls in pallet lots – 1800, 2250 and 2400 wide, also limited stock of PVC white and black
  • Site deliveries available from our storage or direct from Melbourne for a small charge

Technical support from Sales team available 24/7

DVD available for training of your customers and your sales team

 

Our Major Distributors

 

AUSTRALIAN MESH

Safety Roof Mesh

ABN 19 613 929 285

HEAD OFFICE

Dandenong, Victoria 3175

Ph: +61 3 9794 5353

Fax: +61 3 9706 4353

QUEENLAND BRANCH

Yatala, Queensland 4207

Ph: +61 7 3382 7169

Fax: +61 7 3807 5611

Email: mail@australianmesh.com.au